You have no items in your shopping cart.
The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased
Victron Cyrix Battery Combiner Kit is for adding a 2nd or 3rd battery system in your car, boat, RV or any other vehicle. It utilises the simplest and most advanced technology to keep all your batteries charged using the engine€š€žs electrical system but isolates the starting battery when charging ceases so you never get stranded.
Cables and Lugs Included:
There is no need to cut into any factory wiring that may void the manufacturer's warranty of your boat or vehicle.
The software of the Cyrix does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend.
An emergency start push button can be wired to the €šÅ€œstart assist€š� connection if required. The relay will engage during 30 seconds after €šÅ€œstart assist€š� has been momentarily connected to the battery plus. Alternatively, a parallel connect switch can be used to engage the relay as long as the switch remains closed.
||Dimensions (mm) (H x W x D)||Weight (kg)|
|CYR010120011R||46 x 46 x 80||0.11|
|CYR010230010R||65 x 100 x 50||0.27|
You have no items in wishlist.